Concrete mixing station suddenly turned not to do, when we equipment production of concrete mixing station does not make a clear analysis of the phenomenon of rotation, the first is considering the serious overload, followed by mixing blades or side of the blade between the tank wall and a big foreign body, then a motor drive belt is too loose, concrete mixer mixing axis than normal working load, can make the stirring shaft rotate slowly, if the load is too large, stirring shaft will lead to a halt. This can also stop or slow down the shaft of the concrete mixer. The large foreign matter between the mixing blade or side blade and the inner wall of the tank will also cause the mixing shaft to stop running. The reason why the foreign matter can be stuck is that the clearance between the mixing blade or side blade of the concrete mixer and the inner wall of the tank is too large.

Loose motor drive belt of concrete mixer can also lead to slow rotation or stop rotation of mixing shaft of concrete mixer, loose motor drive belt can lead to insufficient power transmission. So how can we solve the problem that the concrete mixing station stops rotating and the concrete mixer is overloaded, which causes the mixing shaft to stop rotating? We only need to adjust the amount of feed, unload the excess materials and reduce the rotating load of the mixing shaft. When the side blade and the inner wall are stuck with materials, there is often a sharp and harsh friction sound before the mixing shaft stops running. In this case, it is necessary to immediately stop the machine for inspection, manually remove foreign matters, and readjust the clearance between the mixing blade of the concrete mixer or the side blade and the inner wall of the tank. If the motor drive belt of concrete mixer is too loose, the tensioning degree of motor drive belt of concrete mixer only needs to be adjusted after the machine stops.