Braking is the brake, if the brake Concrete mixer truck is a problem, then this car who dare to open it? So the brakes are very important, usually a little problem should arouse our attention, such as the brake lubricant selection, air brake too soft and so on. Concrete mixer truck price Concrete mixer truck  brake system not working is one of the main problems braking, initiated after the mixer diesel engine flameout, the barometer to show the value of land quickly, to clarify the compressor air reservoir pipe leak. If no air pressure decreased significantly, first check whether the air compressor V belt is too loose. Otherwise, problems in air compressor, shall promptly repair or change. The main reason for the formation of the illnesses in the following areas: Sinotruk Concrete mixer truck Element (1) concrete mixer cause the brake not working more, pedal travel is too large to be re-adjusted, brake, brake chamber diaphragm deformation or rupture should be replaced immediately to tighten the pipe fittings and break or at change. (2) the pedal free travel is too large. (3) concrete mixer truck control valve diaphragm rupture or deformation. (4) brake arm improperly adjusted, so that the brake chamber push rod travel is too large. Concrete mixer than other vehicles compared to shape relatively large, so the problem should be pay attention to us, mixers and car rear-end collision accidents often occur in everyday life, if we usually pay more attention to the care and maintenance mixer it is not avoidable accidents will be more and more of our personal safety is not to better protection?