concrete  Pump products fine stone concrete is applied to the ground in the project of fine stone concrete filled construction layer or mortar filling large area, layer of high efficiency. Our company is a manufacturer of fine stone concrete pump, the following haomei introduce fine stone concrete pump easy wear parts, so that we can better protect the use of it.

A material outlet, taper pipe, distribution valve

Besides outlet, conical tube, the distribution valve these parts, if it is found that the wear-resistant layer is worn, must timely use welding, it can also be used for a period of time.

Due to space of different project, for example the concrete level, transportation distance, high conveying pump, so in different site, the cutting ring and the glasses plate, the service life of wearing parts is great, but as long as the correct use and handling of the pump, the service life of wearing parts to ensure that the use of a longer period of time, to bring better economic benefits for customers.

Two. The cutting ring and the glasses plate

The cutting ring and the glasses plate is closely related to, with a relative motion components, the contact surface of the two welding with a layer of wear-resistant materials, with special nuts at the end of the S splined shaft, adjustable gap in two (0.1 ~ 0.2) mm. Assembly in the rubber spring S tube and between the cutting ring, so that the cutting ring and the glasses plate can move relatively freely.

With prolonged use, rubber spring loses elasticity, joint surface cutting ring and the glasses plate will wear, resulting in the increasing gap between the two. When the gap is over 0.7mm, should immediately adjust, otherwise the mortar pump will take the “gap” in. Once the mortar into the friction surface, the wear rate of the cutting ring and the glasses plate will greatly speed up.

Wear glasses plate first occurs in the nose bridge, glasses plate and cutting ring gap between the larger, the wear faster. Therefore, must always pay attention to the optical plate and the gap between the cutting ring, once found the gap increases, need to immediately tighten shaped nut or replace worn parts, prevent mortar into the friction surface. When the rubber spring loses elasticity, should be replaced immediately. Can the cutting ring and the glasses plate repair, continue to use the available after repair welding electrode.

Pipeline three.

Jointing pipe, must be exported from the pump machine pick up from front to back, then, must not be to take the first two, followed by the middle.

Incorrect connection, this will make the pipeline between “internal force”, pumping will easily lead to piping from the joint fracture. Pipe joint, export pump machine, elbow, pipe suspended, must be firmly fixed, to prevent the pipe movement and damage to the pipeline.

Because of the distance from the pump more near, pipe concrete pressure is high, so the pump outlet to use the new pipe wall thickness, the old pipeline wall thickness in the far away from the pump, which can improve the service life of the pipeline, reducing the possibility of detonation tube.

For the bend, wear the most serious is the side away from the pump, must often use elbow turn, in order to extend the service life.

The above is the fine stone concrete pump easy loss components discussed, hope to have reference for you, choose a good product, my company’s main products of fine stone concrete pump. If relevant, and online purchase, or call the Advisory exchange. We will be high-quality products, reasonable price and warm service, to discuss cooperation with us, and seek common development!