How do I choose a suitable concrete mixng plant? this a few questions you know。
Building engineering concrete mixing plant is not an easy thing, and choose the suitable engineering concrete mixing plant is the key of the building engineering concrete mixing station, today for you to interpret engineering consideration of concrete mixing station and hopes to be helpful for mass concrete mixing station users.
1, selection of mixing console. According to the construction of concrete performance label, decided to choose what kind of mixing console. Such as water conservancy project must choose compulsory mixing console. Additional, still should according to the mixing concrete material type selecting ingredients station and storage bin.
2, engineering specifications of the concrete mixing plant . According to the construction of the concrete quantity and time limit for a project to decide how to use the specifications of the mixing plant. A concrete addition quantity of M; The concrete number of days for T; Working hours a day for H; Utilization coefficient K, should choose the specifications of the mixing plant X = M/T * H * K, K is 0.7 to 0.7. Consideration in the selection of finished concrete transportation condition. Such as: direct pumping or transport vehicles. Transportation vehicle volume is also decided to main types of important basis.
3, the construction environment and construction object and factors influencing the selection of engineering concrete mixing plant . Should fully consider the effect of construction object and environment, so as to ensure smooth construction and construction quality. Is a one-time pouring amount is bigger when the construction site (optional mixing are stirring up to 12 hours), is a high quality requirements, and no reinforcements near the station, had better choose two specifications smaller mixing station, or select a primary a pair of double machine configuration; Traffic inconvenience, when the site maintenance personnel in and out of the site need to spend a lot of time, had better choose smaller with the same specifications of the double machine station, or prepare enough spare parts, to ensure construction progress smoothly. When the work is scattered, but not too far, distance between the site of the conveying vehicle transmission radius is less than half an hour’s drive, dump truck transport no more than 10 minutes. Had better use gonghaowu concentrated more stirring, to improve the utilization rate of mixing plant and construction of economic benefits.
4, operating personnel quality. In general, small mixing station structure is relatively simple, the control system is also relatively simple. The original with the low required for operation and maintenance personnel. And larger stand structure is complex, high degree of automation, so taller also to the requirement of the operating personnel. So when you are buying station in addition to consider several factors before, this factor should also be considered. The choice of the most economic and effective concrete mixing plant equipment can avoid unnecessary economic waste, when choosing models don’t go for the best, but should be the pursuit of the most suitable and meet your demand, because such a choice is the most economic and effective.