If twin shaft concrete mixer can’t get a good cleaning, it will cause the malfunction of concrete mixer and directly affected the normal service life of twin shaft concrete mixer. Regular cleaning of concrete mixer can prolong the service life of concrete mixer. Here, haomei machinery will provide you with the details of the cleaning mixer, and I hope it is useful.

Clean the body and remove dirt and obstacles of the body.
Check the oil of the lubrication, circuit and control equipment, and add the required lubricating oil.
Before working, add water to the mixing bowl for 1 to 2 minutes, and check the reliability of the clutch and brake.
During the operation of concrete mixer, you should always check whether the motor, reducer, transmission gear noise is normal and whether the temperature rise is too high.
You should be carefully cleaned concrete mixer after complete the work.

JS1000 twin shaft concrete mixer sale

Paying more attentions to the following items when cleaning the concrete mixer:

Making regular maintenance for the specified items in the statute, such as cleaning, lubrication, refueling and so on.
Before starting large or mini concrete mixer for sale, firstly, check whether the controller is good. After shutdown, put water and stone into the mixing tube 10 to 15 minutes for cleaning, and then take out the water and stones. If the operator has to enter the mixing tank for cleaning, besides cut off the power and remove the fuse, you must lock the switch box.
Prohibit the use of sledge hammer to remove these concrete accumulated in the concrete mixer tube, it can only be removed with a chisel.
In the cold season, When you complete the work, washing twin shaft concrete mixer roller, which is totally the same in washing single shaft concrete mixer, and deal with the water in pumps, water tanks and water pipes so as to avoid water pumps, water tanks, water pipes and other freezing damage.