The Brick making machine uses the hydraulic transmission , design reasonable , stable performance high pressure , high production efficiency , beautiful appearance , simple operation convenient , labor saving and time saving ,labor saving ground brick , then atacking 8-15 layer , without supporting .
The performance of the large burning-free brick making machine can be checked from the control system, steering column, mould press head, vibration machine, material storage and division device. The control system of the large burning-free brick machine is controlled by the PLC computer. The frame of the large burning free brick machine adopt the welding technology of high strength steel and special manufacturing, which is extremely firm.
When it comes to the maintenance of concrete mixers, chassis care is most easily ignored by drivers and friends, but the importance of chassis maintenance in winter or wet weather is obvious. In winter, the chassis of concrete mixer should be thoroughly cleaned and rust-proof. First of all, the concrete should be thoroughly cleaned according to the long chassis of the plate. If there is too much dirt on the chassis, it should also be washed with a detergent to remove grease, so as to make the chassis reveal its original “natural color”, so that anti-rust nursing can begin. In the professional beauty shop, the concrete mixer car can be raised to the lifting frame for chassis cleaning, wiping, and rust protection. It should be noted in the middle, after the cleaning must wait until the water on the chassis dry through before rust protection. In the process of nursing, it is important to keep uniform spray coating, forming a durable uniform anti-rust coating. 5-10 minutes of natural air drying will be carried out after completion, and the chassis rust prevention treatment will be completed.
Although there is no aging problem in the new Concrete Truck Mixer paint, it should be thoroughly protected before it is used, because the car paint has already begun to contact the air from the production area to the parking lot, and it is affected by rain and dust and becomes oxidized. Timely and correct maintenance, will make the Concrete Truck Mixer paint to be well protected.
The concrete mixer truck is determined by several parameters. It is impossible to describe a concrete mixer truckconcrete mixer with any single parameter. Axial power (P), blade discharge (Q), head (H), blade diameter (D) and stirring speed (N) are the five basic parameters used to describe a blender. The discharge volume of the blade is proportional to the flow rate of the blade itself, the first power of blade speed and the cubic square of blade diameter.
With the development of civil engineering across the country, various new types of concrete mixing plant are being bought by people, but many customers are not sure how to operate them properly.
Can a concrete pump mix be poured using a crane and bucket? Yes, you can pour (place) concrete that is mixed for a pump truck with a concrete bucket. Concrete buckets designed for cranes or forklifts allow the concrete bucket to be lifted into place, and a lever is used to open the mouth of the bucket so the concrete flows into the forms. Some have bottom discharge “doors” that open like a clam, others have side discharge chutes so the concrete can be dropped into forms that the bucket cannot be position over.
Concrete mixer has many kinds, but the machine commonly used as a host is JS concrete mixer, which is related to JS concrete mixer good mixing effect, so why double shaft concrete mixer mixing effect so good?
In the work of concrete pump truck, if used improperly, it is easy to cause premature damage to some parts of concrete boom pump truck, which not only increases the equipment maintenance cost, but also seriously affects the production.
The small concrete pump brake system ensures sensitive, reliable, effective and non-running deviation. At the same time, the procedures of imprinting and printing meet the requirements of vehicle inspection. The free travel of the brake pedal complies with the requirements of the instruction manual. The small concrete pumps sale alarm device and emergency brake switch work ensure safety and reliability. The running plate and protective railing of the small concrete pump should be fully installed after installation. The safety warning signs and related operation signs should be complete and conspicuous. The operation room should be equipped with fire-fighting equipment.