The concrete mixing plant is mainly composed of five systems, such as mixing machine, material weighing system, material conveying system, material storage system and control system, and other ancillary facilities. The main principle of its work is to use cement as cementing material, mixing sand, lime, coal slag and other raw materials, and finally making concrete, which is put into construction production as wall material.

Many users are worried about the installation of the concrete mixing plant when they buy it. After all, there are so many equipment that non-professionals may not be able to operate it. Therefore, the following aspects should be noted when installing concrete mixing station equipment:

1. Installation of stirring machine. When installing the supporting leg of the main engine, the main engine should be lifted onto a firmly placed pad and fixed with a pin shaft. Hoist the main engine, install the diagonal brace of the main engine, tighten the bolts, and then weld the supporting leg with the pretreated bolts to complete the main machine fastening.

2. Installation of cement silo. After assembling the components of the cement bin and the cement bin bracket, lift the cement bin and place the lower bin bracket on one side of the side facing the powder batching system, fix the upper and lower bin body, and finally fix the anchor bolts.

3. When hoisting the screw conveyor, both ends of the screw conveyor should be controlled as much as possible to prevent the swing of the screw conveyor during the hoisting process. During installation, the screw conveyor can be installed horizontally, vertically and at various inclined angles due to different technologies.

4. The batching plant is installed outside the concrete mixing station. The batching machine should be positioned according to the middle line of the foundation.

5. Installation of other accessories. Lift the pump to the proper position and connect the output pipe. Put the air compressor on the side of the finished hopper, connect the air compressor outlet with the air control box inlet with the air control box outlet, and connect the air control box outlet to the pipe of cement silo broken arch.

When installing the concrete mixing plant equipment, pay attention to the rationality of the connection of all parts, and make sure to test after installation. Haomei machinery is a famous concrete mixing station manufacturer in China. With rich experience in construction, it is able to provide customers with high-quality construction plans. You are welcome to call fangtai hotline for consultation and order or visit the factory at any time.