Inclined belt conveyor is the horizontal belt conveyor belt conveyor out of the aggregate transport to the sand and stone hopper, is the commercial mixing plant must be equipped with the equipment, but in the choice to pay attention to what? haomei reminds customers to consider the following aspects.

1. Inclined Angle of inclined belt conveyor

Business mix user field different station, inclined belt conveyor design and 18 °, 25 °, 45 ° three Angle.

1) 18 ° inclined belt conveyor use cost and equipment cost is lower, the belt head with less material, larger venue. If the business user sites allow station, recommend the user to select 18 ° inclined belt conveyor;

(2) 25 ° inclined belt conveyor use cost and equipment cost than 18 ° inclined belt conveyor is on the high side, the belt head material, the more the smaller venues. This kind of belt in commercial mixing plant can also be recommended if the head material is properly handled and the user needs the site.

(3) 45 ° inclined belt conveyor use cost and equipment cost is higher, the belt head belt material is more, for small. The belt head of commercial mixing plant is not easy to handle with material, unless the user’s site is really limited, it is recommended to use.

2. Electric roller

The electric drum is an important part of the inclined belt conveyor. The common driving forms are shaft gear drive and belt drive. Because the belt of commercial mixing plant drives its belt is easy to damage, and easy to cause vibration of the head of the belt machine after loosening, it is not usually used.

3. Braking device

There are many kinds of braking devices of inclined belt conveyor. Different types of braking devices can be selected according to the technical performance and specific use conditions of the conveyor (such as power size, installation Angle, etc.).

1) belt type non-return device is suitable for the upward transportation of eighteen degrees Angle is less than or equal inclined belt conveyor, when slope conveyor parking, the load under the action of gravity, the conveyor belt will brake when reverse tape into between roller and conveyor belt, and the wedge roller, conveyor belt is braking.

(2) roller non-return device is used for the carriage of upward inclined belt conveyor, the load under the action of gravity, the inversion of conveyer belt drives the star wheel, roller is fixed ring and star wheel incision narrow, roller was chocked, conveyor belt is braking. However, the roller stop is suitable for the occasions when the driving motor capacity of the conveyor is small.