Sicoma concrete mixer accessories and mixers are important equipment for producing concrete, and will be very common in the days. For the operators of mixers, to make the equipment more efficient and convenient to use, the production process must not be ignored. The basic production process of the mixer consists of six areas: site, loading system, feeding, operation, shutdown, and security. Here we will analyze each one for you.

1. The site of Sicoma Mixer accessories and mixer should be kept clean and clean, and the drainage should be smooth. The signal should be in touch with the general and ensure that the equipment can work normally.

2. Sicoma mixer should pay attention to the fact that it cannot be said that the aggregate enters the operation organization. The gravel cannot be fed together with the cement. The material in the hopper trough and other parts should be unloaded once, and it cannot be used for the next feed. .

3. Feeding can be performed once and feeding materials are repeated several times. One feed is to put the materials into the mixer in accordance with the required technical sequence, but it is not allowed to cast cement first.

4. Sicoma mixer accessories in the operation is to manipulate the measurement accuracy, stirring time, to ensure that the technical request; the second is to check the abnormalities and problems, such as the outlet with or without leakage, such as leakage, if there is abnormalities and problems to be timely repair.

5. Before the shutdown, it is necessary to clear the concrete; once the machine is shut down after the completion of the operation, use a small amount of stones and rinse with water to force the concrete mixer; together, arrange the mixing site. When a sudden power outage may cause a downtime, it should be done in a timely manner to tidy up the concrete in the mainframe.

6. It is necessary for any personnel to abide by the operating procedures and safety precautions to ensure safe production.

The above is the problem that Sicoma mixer parts and mixers need to pay attention to in the production. If any kind of situation appears in the production, it will cause the production to fail, so the details must not be sloppy.